Characteristics and related fields of stainless steel elbow

The characteristics of stainless steel elbows are mainly manifested in long-term application without rust and strong corrosion resistance. The element content of stainless steel in general enterprises: steel with a chromium content of at least 10.5% and a carbon content not exceeding 1.2%.

The material of the stainless steel elbow is a carbon steel elbow round tube billet with good physical properties; if it is removed, casting will be greatly reduced. The loss of metal materials in stainless steel elbows and gates, due to the limitation of terrain, should be installed properly. The duration is about ten minutes, and it is very easy to produce thermal cracks.

The raw material of the high-pressure carbon steel elbow is quite special. We remove the iron oxide skin on the inner and outer surface of the welded 90-degree elbow and store it neatly in a dry place with ventilated air in the house. The wear-resistant material is good.

Carbon steel elbows are involved in the architectural decoration design industry. Its technical key points are: the 90-degree elbow itself is included, and the 90-degree elbow of the device itself contains curved bending sections and the two are connected on both sides of the bending section. The parallel line segment also includes an arc-shaped flexural strength portion. The two sides of the bending section of the device are connected to each other according to the flexural strength portion, and the two form a hollow. According to the setting of the bending strength part, the bending strength characteristics of the 90-degree elbow itself are improved, and the service life of the 90-degree elbow itself is also improved.