Precautions for installation of stainless steel elbow

When the stainless steel elbow is installed, the stainless steel elbow can be directly installed on the pipeline according to the connection mode, and installed according to the position used. Under normal circumstances, it can be installed at any position of the pipeline, but it is necessary to facilitate the inspection of the operation. Note that the flow direction of the stainless steel elbow should be upward from the vertical valve flap, and the stainless steel elbow can only be installed horizontally. When installing stainless steel elbows, pay attention to the tightness to prevent leaks and affect the normal operation of the pipeline. Stainless steel elbows have an important role and value in installation and use, and produce good operation in certain environments and media.

Stainless steel elbows should be inspected regularly, and often exposed processing surfaces must be kept clean to remove dirt and stored neatly in a ventilated and dry place indoors. Stacking or open storage is strictly prohibited. Stainless steel elbow ball valves, globe valves, and gate valves are only fully opened or fully closed, and are not allowed to adjust the flow rate, so as to avoid erosion of the sealing surface and accelerated wear.

Long-term storage of stainless steel elbows should be regularly checked. The frequently exposed processing surfaces must be kept clean to remove dirt and stored neatly in a ventilated and dry place in the room. Stacking or open storage is strictly prohibited. Always keep the stainless steel elbows dry and ventilated, keep them clean and tidy, and store them according to the correct storage method.