45 Degree Pipe Short Radius Elbow

The 45 degree Short Radius Elbow manufactured using superior grade raw materials. Butt weld 45 degree Short Radius Elbow are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Standards of 45 Degree Pipe Short Radius Elbow

• GB/T12459-2005 GB/T13401-2005 GB/T10752-2005 SH/T3408-1996 SH/T3409-1996

• SY/T0609-2006 SY/T0518-2002 SY/T0510-1998

• DL/T695-1999 GD2000 GD87-1101

• HG/T21635-1987 HG/T21631-1990

• ASME B16.9-2007 ASME B16.25-2007

• MSS SP 75-2008 MSS SP 43-2008

• CSA Z245.11-05-2005

• EN10253-1-1999 EN10253-2-2007 EN10253-3-2008 EN10253-4-2008

• DIN2605-1-1992 DIN2605-2-1995

• BS1640-1-1962 BS1640-2-1962 BS1640-3-1968 BS1640-4-1968 BS1965-1-1963

• AFNOR NF A 49-289-1990 AFNOR NF A 49-170-1-1999 AFNOR NF A 49-170-2-2009 AFNOR NF A 49-170-3-2009

• AFNOR NF A 49-170-4-2009 ISO3419-1981 ISO5251-1981

• JIS B2311-2009 JIS B2312-2009 JIS B2313-2009

• ASME B16.9 Butt weld 45 degree Long Radius Elbow Dimensions

Production flow of 45 Degree Pipe Short Radius Elbow

Packaging for 45 Degree Pipe Short Radius Elbow in bundles wrapped with strong steel strip, seaworthy packing, or according to customers’ requirements.

Delivery of 45 Degree Pipe Short Radius Elbow is normally 15-30days after receiving T/T deposit