The difference between elbow and elbow in manufacturing process

The difference between elbow and elbow in manufacturing process

The essential difference between elbow and elbow is mainly the difference between "head" and "tube". In addition, there are also great differences in the manufacturing process.

Elbow is a commonly used pipe fitting used in plumbing installation. It is used for the connection of the pipe bend and used to change the direction of the pipe. It is used to connect two pipes with the same nominal diameter or different diameters to make the pipe turn 90 °, 45 °, 180 ° and various degrees.

The following is a brief introduction to the difference between elbow and elbow in manufacturing process:

1. The elbow is relatively short compared to the elbow. R = 1 times to 2 times is the elbow, and the bigger multiple is called the elbow.

2. The cold-bent pipe can be bent with a ready-made straight pipe with a pipe bending machine, and it is not required to be secondary anti-corrosion after one-time completion. However, the elbows must be customized by the manufacturer, should be anti-corrosion, and the ordering period is long.

3. The price of the elbow is higher than that of the elbow, but the cost performance is much higher than that of the elbow. The elbow without anti-corrosion treatment is easy to damage, but because of its low price, it is used in some projects that are not very demanding. Therefore, it is necessary to pay attention when the performance and price of the elbow and the elbow are different.