Pipe Insulation Antifreeze

In warm and humid climates, heated toilets, higher operating temperatures, higher air humidity in rooms (such as kitchens, laundries, certain workshops), or pipelines where the water temperature is lower than room temperature, the outer walls of pipes and equipment Condensation water may be generated, which will damage the wall surface for a long time, cause corrosion of the pipeline, and affect the use and environmental sanitation. Therefore, it is necessary to adopt anti-condensation measures to make the damp-proof insulation layer. The moisture barrier is generally the same as the insulation method.

When setting up a water supply pipeline with an indoor temperature below zero, antifreeze should be considered. After the pipeline is installed, after the water pressure test and the rust removal on the outer surface of the pipeline and the anti-corrosion paint, the insulation and antifreeze measures shall be taken.

Outsourcing cotton blankets (referring to rock wool, ultra-fine glass wool, glass fiber and slag wool felt) as the insulation layer, and then outsourcing the glass fiber cloth protective layer, the surface painted and lacquer.

The pipeline uses thermal insulation tiles (foam, diatomaceous earth, cement vermiculite, foam plastic, rock wool, ultra-fine glass wool, glass fiber, slag wool, and cement expanded perlite) as the insulation layer, and the glass fiber cloth protective layer is covered, and the surface brush Blend paint.