Common processing method for stainless steel elbow pipe fittings

The so-called stainless steel elbow refers to the pipe that changes the direction of the pipeline. According to the angle, there are three commonly used types, such as 45°, 90°, and 180°. The processing methods of stainless steel elbows are generally mechanical processing such as: stamping method, forging method, roller processing method, rolling method, bulging method, stretching method, bending method, and combined processing method; but in the current production and processing There are not many common methods for processing stainless steel elbows.

There are three commonly used forming methods for stainless steel elbows: stretching, stamping, and roller.

Stainless steel pipe fittings are a new type of pipe fittings with a wide range of uses. There are many ways to process them, among which:

1. The stainless steel pipe fittings can be forged, and a part of the pipe can be punched out, so that the outer diameter can be reduced.

2, stainless steel pipe fittings can use the roller method, you can put the core inside the stainless steel pipe fittings, the outside can be pressed with a roller to carry out the round edge processing.

3, stainless steel pipe fittings can be stamped, you can extend the pipe end to the desired size and shape by tapping the core and then punching the bed.